How Fixed Deposit Interest Is Calculated
A Fixed Deposit uses standard compound interest: the bank adds interest to your principal at a fixed frequency, and from that point on, interest is earned on the new, larger balance too - not just the original principal. This is why the compounding frequency you choose (annually, semi-annually, quarterly, or monthly) affects the final maturity amount even at the same headline interest rate: more frequent compounding means interest starts earning its own interest sooner.
Interest earned is simply the maturity amount minus the principal: Interest = M − P. For example, ₹1,00,000 at 7% per year, compounded quarterly, for 5 years works out to r = 0.07, n = 4, t = 5, giving a maturity of roughly ₹1,41,478 - about ₹41,478 in interest.
How Recurring Deposit Interest Is Calculated
An RD is trickier to calculate than an FD because every monthly installment is a fresh deposit that only starts earning interest from the month it goes in - the installment you deposit in month 12 has far less time to grow than the one deposited in month 1. Rather than summing up dozens of individual compound-interest calculations, Indian banks publish one consolidated formula for RD maturity.
Important assumption: this is the exact formula published by major Indian banks (SBI, ICICI, and most others) for RD maturity, and it bakes in one specific, real assumption - interest compounds quarterly, not monthly, even though your deposits themselves happen every month. That's the standard bank convention this calculator follows, so it matches the numbers you'd see on an official bank RD calculator.
Worked example: a monthly installment of ₹5,000 at 7% per year for 12 months gives i = 0.07 ÷ 4 = 0.0175 and q = 12 ÷ 3 = 4 quarters. Plugging into the formula gives a maturity of approximately ₹62,300, against a total of ₹60,000 deposited - roughly ₹2,300 in interest earned (figures rounded for illustration; use the calculator above for exact results).
Total deposited is simply R × number of months, and interest earned is M − total deposited.
FD vs RD: Why the Interest Differs
| Aspect | Fixed Deposit | Recurring Deposit |
|---|---|---|
| When principal starts earning | The full amount, from day one | Each installment, from its own deposit date |
| Average balance earning interest | Full principal, for the whole tenure | Roughly half the total deposited, since later installments have less time to grow |
| Typical interest on the same total sum | Higher | Lower, but still meaningfully more than a simple savings account |
| Compounding basis used here | Your chosen frequency (annual/semi-annual/quarterly/monthly) | Quarterly (standard bank convention) |
This is why depositing ₹1,00,000 as a lump-sum FD earns noticeably more interest than depositing the same ₹1,00,000 spread across an RD as ~₹8,333/month over a year at the same rate - it's not a worse product, just a different, gradual way of investing that still beats letting the money sit idle.
Which One Should You Choose?
If you already have a lump sum sitting idle - a bonus, a maturity payout, or savings you won't need for a while - an FD generally earns more interest for the same rate and tenure, since the entire amount compounds from day one. Choose a compounding frequency your bank actually offers on the product you're comparing; more frequent compounding (monthly or quarterly) edges out annual compounding at the same headline rate.
If you're building savings from regular income rather than investing a sum you already hold, an RD turns that into a disciplined monthly habit while still earning meaningfully more than letting the money sit in a savings account. Many people run both at once - an FD for money already saved, and an RD to keep building the next lump sum.
Frequently Asked Questions
Maturity = P x (1 + r/n)^(n x t), where P is the principal, r is the annual rate as a decimal, n is the number of times interest compounds per year, and t is the tenure in years.
It uses the standard bank RD formula: M = R x [(1+i)^q - 1] / [1 - (1+i)^(-1/3)], where R is the monthly installment, i is the quarterly rate (annual rate / 100 / 4), and q is the number of quarters in the tenure. This assumes interest compounds quarterly even though deposits are monthly - the standard convention published by Indian banks.
In an RD, each installment only starts earning interest from the month it's deposited, so the average balance earning interest over the tenure is roughly half of the total deposited. In an FD, the entire principal earns interest from day one, so it accumulates more interest over the same tenure and rate.
The formula still works with a fractional number of quarters - for a 13-month RD, q works out to 13/3, or about 4.33, rather than being rounded to a whole number of quarters. This mirrors how banks calculate RD maturity for any tenure length, not just ones that land on a clean multiple of three months.
They should be very close, since this tool uses the same standard formulas and quarterly-compounding convention published by Indian banks. Small differences can still appear because of rounding conventions, minimum balance rules, premature-withdrawal penalties, or special rates some banks offer on specific tenures - always confirm the exact figure with your bank before relying on it, since this tool is an estimate, not financial advice.