ROI and Break-Even Calculator

The Complete ROI and Break-Even Guide

How return on investment, annualised ROI, payback, contribution margin, break-even units and margin of safety are worked out, and how to read each result.

Open ROI and Break-Even Calculator

Overview: Two Questions, One Calculator

The calculator answers two related questions. The first, on the ROI tab, is whether an investment paid off and how fast. The second, on the Break-even tab, is how much a business has to sell before it covers its fixed costs. Both use simple arithmetic, so each answer is only as good as the figures you supply.

Nothing here is a forecast. The tool turns the numbers you supply into comparison metrics, so each result is only as good as your assumptions.

ROI Formulas, Step by Step

StepCalculationWhat it means
Total costInvestment cost + extra costsEverything that went in
Net profitTotal returns − total costWhat remains after getting everything back
ROINet profit ÷ total cost × 100Profit as a percentage of cost, over the whole period
Holding period in yearsMonths ÷ 12, or years as enteredConverts the period into a common unit
Annualised ROI(Total returns ÷ total cost)^(1 ÷ years) − 1Compounded yearly rate, for fair comparison
Payback periodTotal cost ÷ (total returns ÷ holding months)Months until returns equal the cost, if returns arrive evenly

Zero returns show an annualised rate of −100% and a payback of never. The calculator also reports how much of the cost was recovered, which helps when payback falls outside the holding period.

Break-Even Formulas, Step by Step

StepCalculationWhat it means
Contribution per unitSelling price − variable cost per unitWhat each sale adds towards fixed costs
Contribution margin ratioContribution ÷ price × 100Share of each sale left after variable cost
Break-even unitsFixed costs ÷ contribution per unit, rounded upUnits needed for zero profit and zero loss
Break-even revenueFixed costs ÷ contribution ratioSales value at the break-even point
Units for a target profit(Fixed costs + target profit) ÷ contribution per unitVolume needed to earn the profit you want
Margin of safety(Current units − break-even units) ÷ current units × 100How far sales can fall before the business loses money

The contribution margin drives the whole tab. At a ₹450 price and ₹270 variable cost, each unit contributes ₹180 towards fixed costs, so small changes in price or variable cost move break-even volume a lot.

Control Walkthrough

Choose a tab first, then fill in its fields. Results update as you type.

CurrencyThe list changes only the symbol and digit grouping, so keep every figure in one currency.
Load sampleRestores the example figures on both tabs. It keeps the tab you are on and the currency you chose.
Compare with a second scenarioTicking this box reveals scenario B beside A and adds a side-by-side table. Each scenario has its own name, which you can edit.
Investment cost and total returnsInvestment cost must be above zero. Total returns can be zero. Enter all money received, not only profit.
Extra costsOptional. Any fees or running costs beyond the investment go here, and they are added to the cost before ROI is worked out.
Holding period and unitEnter a number above zero, then choose months or years from the dropdown. Annualised ROI and payback both depend on this length.
Verdict and tilesThe verdict chip reads Profit, Loss or Break-even. The tiles show net profit, ROI, annualised ROI and payback period.
Working listShows each step with your numbers substituted, so you can check the arithmetic and paste it into a note.
Fixed costs, price and variable costThe Break-even tab needs all three. Price must be higher than variable cost, otherwise every sale loses money and no break-even point exists.
Target profit and current salesBoth are optional. A target profit gives the units needed to reach it. Current sales unlock the margin of safety and the profit at that volume.
ChartPlots revenue and total cost against units. Shaded areas show the loss and profit zones, and a dashed line marks current sales.

Worked Examples

Example 1 - the default ROI comparison. Scenario A puts in ₹2,50,000 with ₹15,000 of extra costs, so the total cost is ₹2,65,000. Returns are ₹3,40,000, giving a net profit of ₹75,000 and an ROI of 28.30%. Over 1.5 years, the annualised ROI is about 18.07%. Returns spread evenly give a payback of about 14.0 months. Scenario B puts in ₹1,80,000 with ₹5,000 of extra costs, a total of ₹1,85,000. Returns of ₹2,30,000 give a profit of ₹45,000, an ROI of 24.32% and an annualised ROI of 24.32%, because the period is exactly one year. Its payback is about 9.7 months.

Example 2 - reading the comparison. In the side-by-side table, scenario B wins on annualised rate (24.32% against 18.07%), but scenario A makes more money in total, ₹75,000 against ₹45,000. The rate shows which use of each rupee works harder; the total shows which project is bigger.

Example 3 - a two-year project. An investment of ₹1,00,000 with ₹10,000 of extra costs and ₹1,50,000 of returns over 2 years gives a total cost of ₹1,10,000, a net profit of ₹40,000 and an ROI of 36.36%. The annualised ROI is 16.77%, which is lower than half the ROI, because it compounds over two years. Payback is 17.6 months.

Example 4 - break-even point. Fixed costs of ₹1,20,000, a price of ₹450 and a variable cost of ₹270 give a contribution of ₹180 per unit and a 40.00% contribution ratio. Break-even is 666.67 units, shown as 667 after rounding up. That is ₹3,00,000 of revenue. For a ₹60,000 profit, the calculator needs 1,000 units, which is ₹4,50,000 of revenue.

Example 5 - margin of safety. Using the same figures, current sales of 900 units sit 233.3 units above break-even. The margin of safety is 25.93%, and the profit at that volume is ₹42,000. If sales were only 600 units, the verdict would switch to Below break-even, with 66.7 units short and a loss of ₹12,000, and the margin of safety would read −11.1%.

Tips and Common Mistakes

Count all the moneyInclude every cost in extra costs or fixed costs, such as fees, insurance and software. Leaving costs out makes every ROI look better than it is.
Mind the timeA high ROI over ten years can be a lower yearly rate than a modest ROI over one year. Check the annualised figure before comparing.
Use net, not list, priceEnter the price a customer actually pays after discounts. A list price that is never achieved inflates the contribution and the break-even margin.
Watch the margin of safetyA thin margin means a small drop in sales causes a loss. Plan for a realistic downside rather than only the expected case.

Common mistakes include mixing monthly and annual figures, entering a variable cost that already includes some fixed overheads, and treating payback as the whole story. Payback ignores what happens after cost is recovered, so read it alongside net profit and annualised ROI.

Frequently Asked Questions

What is the difference between ROI and annualised ROI?

ROI is the total profit as a percentage of the total cost over the whole holding period. Annualised ROI converts that into a compounded yearly rate, so investments held for different lengths of time can be compared. A two-year project with a 36.36% ROI has an annualised rate of 16.77%, not 18.18%.

Why does break-even round up to a whole unit?

You cannot sell part of a unit, and a fraction of a unit does not fully cover fixed costs. The calculator shows the exact figure, such as 666.67 units, then rounds up to 667 so the stated volume definitely covers fixed costs.

Does the calculator account for taxes?

No. It works with the figures you enter. Include any tax you need to count as an extra cost or a fixed cost. Tax treatment depends on your situation and jurisdiction, so check it separately with a qualified professional.

Why is payback different from the holding period?

Payback is the time it takes for returns to equal the total cost, assuming returns arrive evenly across the holding period. If payback is shorter than the holding period, the cost is recovered before the end. If it is longer, the calculator reports that the cost was not recovered within the period.

Estimates for planning only, not financial or investment advice. Actual loan, deposit or investment terms (rates, fees, compounding, taxes and charges) vary by lender and institution, so confirm them with the provider before you decide.
Open ROI Calculator