Unit Converter

The Complete Guide to Unit Conversion

The exact formulas and factors behind length, weight, volume, temperature, and area conversions - and when to reach for each one.

Open Unit Converter

Length Conversion

Length conversions are all linear - to convert any length into another unit, first multiply by its factor to get meters (the base unit), then divide by the target unit's factor.

Result = Value × FactorFrom ÷ FactorTo
UnitEqual To (in meters)
Millimeter (mm)0.001 m
Centimeter (cm)0.01 m
Meter (m) - base unit1 m
Kilometer (km)1,000 m
Inch (in)0.0254 m
Foot (ft)0.3048 m
Yard (yd)0.9144 m
Mile (mi)1,609.344 m

For example, to convert 5 feet to meters: 5 × 0.3048 = 1.524 m. To go the other way, 2 meters to feet: 2 ÷ 0.3048 ≈ 6.5617 ft.

Weight / Mass Conversion

Weight and mass units follow the same base-unit approach, using the kilogram as the base.

UnitEqual To (in kilograms)
Milligram (mg)0.000001 kg
Gram (g)0.001 kg
Kilogram (kg) - base unit1 kg
Tonne (t)1,000 kg
Ounce (oz)0.028349523125 kg
Pound (lb)0.45359237 kg

For example, a 70 kg person weighs 70 ÷ 0.45359237 ≈ 154.32 lb.

Volume Conversion

Volume units convert through the liter as the base unit. This tool uses US customary volume units (US gallon, US quart, US cup, US fluid ounce), which are smaller than their imperial (UK) counterparts.

UnitEqual To (in liters)
Milliliter (ml)0.001 L
Liter (L) - base unit1 L
Cubic Meter (m³)1,000 L
US Gallon (gal)3.785411784 L
US Quart (qt)0.946352946 L
Cup (US)0.2365882365 L
Fluid Ounce (US fl oz)0.0295735295625 L

For example, a 2-liter bottle holds 2 ÷ 3.785411784 ≈ 0.5283 US gallons.

Temperature Conversion - A Different Kind of Formula

Unlike length, weight, volume, and area, temperature scales do not share a common zero point - 0°C is not the same physical temperature as 0°F or 0 K. Because of that, converting temperature always goes through Celsius as an intermediate step, using addition/subtraction as well as multiplication.

°C = (°F - 32) × 5/9
°F = °C × 9/5 + 32
K = °C + 273.15
°C Celsius, the metric scale, water freezes at 0 and boils at 100.
°F Fahrenheit, water freezes at 32 and boils at 212.
K Kelvin, the scientific scale, starts at absolute zero (-273.15°C).

For example, 98.6°F (normal body temperature) converts to Celsius as (98.6 - 32) × 5/9 = 37°C, and to Kelvin as 37 + 273.15 = 310.15 K.

Area Conversion

Area units convert through the square meter as the base unit. Because area is a squared measurement, notice that its factors are the square of the equivalent length factor (for example, a foot is 0.3048 m, and a square foot is 0.3048² ≈ 0.0929 m²).

UnitEqual To (in square meters)
Square Meter (m²) - base unit1 m²
Square Kilometer (km²)1,000,000 m²
Square Foot (ft²)0.09290304 m²
Acre4,046.8564224 m²
Hectare (ha)10,000 m²

For example, a 1-acre plot is 4,046.8564224 ÷ 10,000 ≈ 0.4047 hectares.

Common Use Cases

Cooking & RecipesConvert a recipe's cups and ounces into milliliters and grams, or the other way around.
Travel & DistancesWork out how many kilometers a road-trip mile count is, or how tall a building is in feet.
Fitness & HealthSwitch your body weight or a dumbbell's load between kilograms and pounds instantly.
DIY & ConstructionConvert a floor plan's square meters to square feet, or millimeters to inches for a fitting.
Science & SchoolConvert lab measurements between Celsius, Fahrenheit, and Kelvin for homework or experiments.

Frequently Asked Questions

Why is area's conversion factor the square of the length factor, not the same number?

Because area is a two-dimensional measurement, converting it applies the linear conversion factor twice - once for each dimension being converted. A foot converts to meters by multiplying by 0.3048, but a square foot converts by multiplying by 0.3048 squared, about 0.0929, since both the length and width of that square are being converted at the same time.

Why does the tool convert everything through a base unit instead of using a direct factor between every pair of units?

Routing every conversion through one shared base unit per category - meters for length, kilograms for weight, liters for volume, square meters for area - means only one factor per unit needs to be stored, rather than a separate factor for every possible pair of units. Converting feet to yards, for instance, first converts feet to meters, then meters to yards, which gives the same result as a direct feet-to-yards factor but needs far fewer numbers to maintain and gets less error-prone as more units are added.

Is Kelvin ever negative, the way Celsius and Fahrenheit can be?

No - Kelvin is an absolute scale that starts at absolute zero (0 K, equal to -273.15°C), the coldest temperature physically possible, so a valid Kelvin reading is never negative. Celsius and Fahrenheit place their zero points at arbitrary reference temperatures instead - the freezing point of water, and a historical brine mixture, respectively - which is why both routinely go negative in everyday weather.

What's the difference between a US gallon and an imperial gallon?

This tool uses US customary units for volume (US gallon, US quart, US cup, US fluid ounce), which are smaller than their imperial (UK) counterparts. A US gallon is about 3.785 liters, while an imperial gallon is about 4.546 liters.

Why do my converted numbers sometimes have many decimal places?

Most conversion factors between metric and imperial units are not round numbers (for example, 1 mile = 1.609344 km), so the exact result often carries several decimal digits. The tool rounds the displayed value sensibly and trims unnecessary trailing zeros.

Can I convert between two imperial units, or two metric units, directly?

Yes. Both the "From" and "To" dropdowns list every unit in the selected category, so you can convert feet to yards, kilometers to meters, or any other combination within the same category, not just metric-to-imperial.

Open Unit Converter