Monitor & Display Tester

The Complete Monitor Testing Guide

What dead and stuck pixels really are, how to spot color banding with a gradient test, check your monitor's geometry and scaling, and test touch screen response.

Open Tool

What Are Dead and Stuck Pixels?

Every LCD/LED panel is made of millions of individual pixels, each built from three tiny red, green, and blue sub-pixels. A dead pixel has lost power completely and shows up as a small black dot no matter what color is displayed behind it - solid black, solid white, it makes no difference. A stuck pixel is different: it still receives power, but one or more of its sub-pixels is locked "on," so it appears as a tiny bright dot of red, green, or blue that never changes even as the rest of the screen does.

The most reliable way to find either is to fill the entire screen with a single solid color and scan every corner - a defect that's invisible against a busy desktop background becomes obvious against pure red, green, blue, white, or black. That's exactly what the solid color test on this page does: click through each color (or click/tap anywhere on the screen to cycle to the next one) while looking closely for any pixel that doesn't match its surroundings. Running the test in fullscreen matters, since it removes the browser's toolbar and address bar so every physical pixel - including the very edges of the panel - is covered by the test.

What Does the Gradient Banding Test Reveal?

What you seeWhat it means
Perfectly smooth transitionYour panel and video signal are rendering full color depth correctly
Visible stripes or hard stepsColor banding - often an 8-bit panel, a lower-bit video connection, or aggressive image processing ("dynamic contrast")
A sudden color shift at one spotCan indicate panel uniformity issues or backlight bleed rather than banding

A gradient banding test fills the screen with a smooth transition - black to white, or black to a single color - and asks a simple question: does it blend seamlessly, or can you see distinct stripes? Banding happens when a display (or the cable feeding it) can't represent enough shades between two colors, so it rounds nearby values to the same shade, creating visible steps instead of a smooth gradient. This is most noticeable in dark scenes in movies and games, like a night sky or a shadowy room, where banding across similar dark tones is easiest to spot.

Checking Geometry, Alignment & Scaling

Straight LinesFine grid lines should look perfectly straight edge to edge - any visible curve or wobble suggests a scaling or geometry problem.
Even SpacingGaps between grid lines should stay consistent across the whole screen, including near the edges of ultrawide or curved monitors.
Correct Aspect RatioA grid that looks stretched or squashed usually means the wrong resolution is selected for your panel's native aspect ratio.
Full-Edge CoverageThe border of the grid pattern should reach every edge of the screen - a visible gap can mean overscan or underscan is active.

Geometry problems are more common than they used to be thanks to scaling on non-native resolutions, ultrawide and curved panels, and TVs used as monitors with overscan enabled. The grid/geometry test on this page draws fine, evenly spaced lines across the whole screen with a center crosshair, so any curve, stretch, or misalignment becomes obvious at a glance.

Testing Touch Screen Response

Full-Grid CoverageDrag across every cell of the touch grid - each one turns green the instant it registers a touch, so gaps are easy to spot.
Multi-Touch SupportTouch with several fingers at once - each one gets its own colored dot, confirming how many simultaneous touches the panel can track.
Edge & Corner Dead ZonesTouch digitizers are most likely to lose sensitivity right at the edges and corners - the grid makes those cells just as visible as the center.
ResponsivenessDrag slowly and quickly across the same area - a laggy or jumpy dot can point to a slow digitizer scan rate rather than a dead zone.

The touch screen test lays an 8x5 grid over the display and lights up each cell in green the moment it senses a touch, making it simple to methodically cover the entire panel - including the edges and corners where touch digitizers most often lose sensitivity. The info bar above the grid reports your device's maximum reported simultaneous touch count alongside how many touches are active right now, so you can also verify multi-touch gestures work as expected. On a device with no touchscreen, the test still accepts mouse drags so you can see how the grid behaves, but a real pass/fail check needs actual touch hardware.

Frequently Asked Questions

Why do LCD and OLED panels develop dead or stuck pixels in the first place?

A dead pixel is usually a transistor failure in the panel's backplane that cuts power to that sub-pixel entirely, often traced back to a manufacturing defect or physical damage. A stuck pixel more often comes from a sub-pixel transistor that fails to switch off, leaving current flowing to just one sub-pixel - this can be present from manufacturing or develop later, and unlike a dead pixel it can sometimes be resolved by rapidly cycling colors at that spot.

Why can't software just scan for and detect dead pixels automatically?

A dead or stuck pixel is a hardware fault in the physical panel, not something the operating system or graphics driver has visibility into - the GPU sends the same signal to every pixel and has no way to read back what actually lit up. The only reliable way to find one is visually: fill the screen with known solid colors and let a person's eyes compare every pixel against its neighbors, which is exactly what a monitor test does.

Does display scaling in Windows or macOS affect how accurate these tests are?

Fractional scaling (like 125% or 150%) can make the browser render page content, including test patterns, at a size that doesn't map cleanly to physical pixels, which can blur fine details like the sharpness text or grid lines. For the most accurate pixel-level test, temporarily set your display to 100% scaling and its native resolution before running the color and grid tests, especially on a high-DPI panel.

What does the gradient banding test actually show?

A smooth black-to-white (or color) gradient should transition without visible steps. If you see distinct stripes instead of a smooth blend, that's color banding - usually caused by a lower color-depth panel, an 8-bit vs 10-bit signal mismatch, or a compressed/low-bandwidth video cable.

Can a dead or stuck pixel be fixed?

A true dead pixel usually cannot be repaired. A stuck pixel can sometimes be resolved with gentle pressure massage techniques or pixel-cycling software that rapidly flashes colors at that spot, though results vary and there's some risk of making things worse, so proceed carefully.

Why does the grid pattern matter for a monitor test?

Straight, evenly spaced grid lines confirm the display is scaling and aligning the image correctly. Wavy, uneven, or slightly curved lines can point to an incorrect resolution/refresh-rate setting, poor scaling on an ultrawide or curved panel, or a geometry problem with the panel itself.

How do I test a touch screen for dead zones?

Switch to the touch screen test and drag your finger across every cell of the on-screen grid. Each cell turns green the moment it registers a touch, so a cell that stays gray after you've clearly touched it points to a dead or unresponsive zone on the digitizer, often near the edges or corners of the panel.

How can I check how many fingers my touch screen supports?

Touch the screen with multiple fingers at the same time during the touch screen test - each finger shows up as its own colored dot, and the info bar reports both the number of touches currently active and the maximum simultaneous touches your device reports supporting.

Open Tool