UTM Link Builder

The Complete UTM Link Builder Guide

What UTM parameters do, what every control on the builder does, worked examples of tagged and broken-down links, and the mistakes that quietly split analytics reports.

Open UTM Link Builder

What UTM Parameters Do

UTM parameters are short labels added after a question mark at the end of a web address. Analytics software reads them when a visit arrives, and uses them to file the visit by source, medium and campaign. The destination page itself does not change.

The builder does two jobs. Build a link assembles a tagged address from a destination and your tag values, with checks for common mistakes. Break down a link takes an address you already have, splits its query string into editable rows, and rebuilds it. Everything is calculated in your browser.

Control-by-Control Walkthrough

Mode switch and Load sample

Build a link is the default view and Break down a link opens the parser. The chosen mode is remembered in this browser. Load sample restores the festive example used below and clears any extra parameters. The page opens with that sample already loaded, so clear the Term and Content fields before following Examples 2 to 4, or those values stay in the link.

Destination

Type the full address with https://. The field turns red if the value is not a complete http or https address or contains a space. A #fragment you type stays at the very end of the final link.

Campaign tag presets

Each chip sets utm_source and utm_medium together and leaves campaign, term and content untouched. A chip stays highlighted while the two fields still match it.

Chiputm_sourceutm_medium
Email newsletternewsletteremail
Google Adsgooglecpc
Facebook postfacebooksocial
Print or QR codeprintqr

The five tag fields

Source, Medium, Campaign, Term and Content write to the five matching parameters. Only filled fields appear. Source, medium and campaign are required, and the tool warns when one is empty. An empty term or content is simply left out.

Extra parameters

Add parameter creates a name and value row, and the small cross removes it. Extras use the same cleaning as the tag fields and are placed after the UTM tags. If the destination already has a parameter with the same name, your value replaces it.

Formatting options

Spaces offers underscores (the default), hyphens, or Keep, which sends spaces as %20. Lowercase all values is on by default. Keep existing query parameters is also on by default and keeps the destination's own query string. Turn it off to drop that string.

Tagged link, Copy and warnings

Your tagged link updates as you type, and its length appears beneath it. Copy places the link on the clipboard, briefly shows Copied, and adds the link to the recent list. The warnings explain what the builder noticed, from a bad destination to missing tags, mixed capitals and spaces. The Parameter breakdown labels each parameter as UTM, Custom or Existing, and marks any UTM value that replaced an old one.

Break down a link

Paste a link to split its query string into one editable row per parameter, with UTM names badged. Base address holds everything before the question mark. The rebuilt link updates as you type, and the stats line names any missing required tag. Send to builder loads the link into Build mode, placing the five standard tags into their fields and everything else under Extra parameters.

Recently copied links

The last ten links you copied, from either mode, appear with Use, which loads one back into the builder, and Copy. Clear list empties it. The list lives only in this browser.

Worked Examples

Example 1: a festive newsletter link

Use the destination https://www.example.in/offers/festive-sale, the Email newsletter chip, Content hero banner, and Campaign Festive Sale 2026, with the defaults left on. The campaign becomes festive_sale_2026, the content becomes hero_banner, and the empty term is omitted:

https://www.example.in/offers/festive-sale?utm_source=newsletter&utm_medium=email&utm_campaign=festive_sale_2026&utm_content=hero_banner

The address is 136 characters, and the warnings report that everything looks good.

Example 2: changing the space rule

Set Spaces to Keep. The campaign and content now read festive%20sale%202026 and hero%20banner. The address is 142 characters, and a warning notes that encoded spaces are harder to read in reports. Hyphens instead give festive-sale-2026 and hero-banner, with no warning.

Example 3: a destination that already has tags

With the destination https://example.com/landing?utm_source=old&gclid=abc123, Source newsletter, Medium email and Campaign spring_sale, and Keep existing query parameters on, the output is:

https://example.com/landing?utm_source=newsletter&gclid=abc123&utm_medium=email&utm_campaign=spring_sale

That is 104 characters. The old source was replaced in its original position, and the click identifier gclid was kept. Turning the option off drops gclid, and a warning says so.

Example 4: lowercase switched off

Turn off Lowercase all values. Enter Source Facebook, Medium paid social, Campaign Spring, the destination https://shop.example.com/cart#top, and an extra parameter ref set to Homepage Hero. The output is https://shop.example.com/cart?utm_source=Facebook&utm_medium=paid_social&utm_campaign=Spring&ref=Homepage_Hero#top, and an inconsistent-casing warning appears. Turning lowercase back on gives utm_source=facebook&utm_medium=paid_social&utm_campaign=spring&ref=homepage_hero, which passes every check.

Example 5: breaking down a link

Paste https://shop.example.com/cart?utm_source=Facebook&utm_medium=cpc&ref=homepage#top into Break down a link. The table shows utm_source and utm_medium as UTM rows and ref as a plain parameter, and the stats line reads 3 parameters, 2 UTM - missing utm_campaign. Send to builder then produces https://shop.example.com/cart?utm_source=facebook&utm_medium=cpc&ref=homepage#top, with a warning that utm_campaign is missing.

Example 6: a plus sign inside a value

Paste https://example.com/search?q=a+b&utm_source=x%20y. The parser reads a+b and x y, and the rebuilt link is https://example.com/search?q=a%2Bb&utm_source=x%20y. The plus sign is now %2B, which changes the meaning if the site treats plus as a space.

Tips and Common Mistakes

Fill in the required trio on every link. A missing campaign still records the visit, but reports cannot place it in an initiative.

Use one spelling per channel. Pick email and keep it, rather than alternating with e-mail. The preset chips always write the same pair.

Keep a lowercase house style. Leave lowercase on unless you have a clear reason not to, and apply that choice to the whole campaign.

Do not tag links between pages of your own site. Many analytics setups start a new campaign session when a tagged link is clicked, so an internal tag can overwrite the recorded source of the visit.

Read the rebuilt link before copying it whenever a value contains a plus sign, as in Example 6.

Frequently Asked Questions

Is there a required order for the UTM parameters in a link?

Analytics tools read UTM parameters by name, so their order does not change the result. This builder writes the five standard tags in a fixed sequence (source, medium, campaign, term, content), followed by any extra parameters, so every link it produces looks the same. When Keep existing query parameters is on, parameters that were already on the destination stay first, and a replaced value keeps its original position.

Why does the builder warn about capital letters if the link still loads?

The page behind the link is the same either way. The concern is reporting. Analytics tools often group values exactly as written, so Newsletter and newsletter appear as two separate rows. The warning is a reminder to settle on one casing before the campaign goes live.

Can I change the tags in a link after it has been shared?

No. Once a link has been sent out, the tags inside it cannot be edited, because every copy is a fixed string. If a tag was wrong, create a corrected link and use that from then on. Running a link through Break down a link before you publish it is the simplest way to catch mistakes early.

Does the builder remember what I typed?

Yes, but only inside the same browser. The page stores the destination, the five tags, extra parameters, formatting choices, the pasted link, the current mode and the recent list in local storage. Another browser or device starts fresh with the sample values, and clearing the site data for the page resets everything.

Open UTM Link Builder