Gamepad & Controller Tester

Gamepad & Controller Tester

Check every button, trigger, and analog stick on your controller live, right in your browser. Nothing you press is ever sent anywhere.

No controller detected yet. Connect a gamepad via USB or Bluetooth, then press any button on it - most browsers only detect a controller after it receives an input.

Gamepad API not supported in this browser

Your browser doesn't support the Gamepad API used to read controller input. Try a recent version of Chrome, Edge, Firefox, or Safari.

Connected
Left Stick
X: 0.00   Y: 0.00
Right Stick
X: 0.00   Y: 0.00
Buttons
Controller input is read live via your browser's built-in Gamepad API and rendered locally - nothing is recorded, saved, or uploaded.

What Is a Gamepad Tester?

A gamepad tester lets you check that every button, trigger, bumper, D-pad direction, and analog stick on a game controller is working correctly - without opening a game. It uses the browser's built-in Gamepad API to read raw input directly from the controller, in real time, and shows you exactly what the browser sees: which buttons are pressed, how hard an analog trigger is being pulled, and where each stick is pointing.

It's the fastest way to diagnose a "my controller isn't working right" problem - a stick that drifts off-center, a button that doesn't register, or a trigger that doesn't reach full pressure - since you can see the raw values update live as you interact with the controller.

Common Ways to Use This Tool

Diagnose Stick DriftWatch the dot on the stick pad while your hands are off the controller - it should sit dead center, not wander.
Check Every ButtonPress each face button, bumper, trigger, and D-pad direction and confirm it lights up in the grid immediately.
Test a New or Used ControllerRun through every input right after unboxing, or before buying a secondhand controller, to confirm nothing is faulty.
Compare Multiple ControllersConnect several controllers and switch between them in the dropdown to test each one individually.

Frequently Asked Questions

Why doesn't my controller show up right away?

Most browsers require a user gesture on the controller itself - pressing any button or moving a stick - before they will report it as connected, even if it's already paired or plugged in. Press any button on your controller after opening this page.

Does this tool send my controller input to a server?

No. Button presses and stick positions are read directly from your browser's Gamepad API and rendered locally - nothing is ever uploaded or transmitted anywhere.

Can I test a Bluetooth controller, not just wired?

Yes. Any controller your operating system recognizes as a standard HID gamepad - wired via USB or paired over Bluetooth - can be picked up by the browser's Gamepad API, as long as it's paired and connected at the OS level first.

Why do trigger buttons show a pressure value instead of just pressed/not pressed?

Analog triggers (like L2/R2 or LT/RT) report a pressure value from 0 to 1 in addition to a pressed state, so this tool shows both - a filled highlight when pressed, and a numeric/bar readout of how far the trigger is pulled.

Can I test more than one controller at once?

Yes. Every connected and detected controller appears in the dropdown selector - connect multiple controllers, press a button on each, then switch between them to test each one individually.